Shenzhen Everbright Lighting Technology Co., Ltd
Everbright Lighting---------- safer, more comfortable and more economical
Add to Cart
Industrial 150W LED Warehouse Lighting 220V IP65 High Bay Lamp
Industrial Factory Workshop Warehouse LED Lighting 150W High Power LED High Bay Canopy Light
| 1 | Rated voltage | V | 220V |
| 2 | Rated power | W | 60/80/90/100/120/150/160/180 |
| /200/240/250/270/300 | |||
| 3 | Average life of light source | H | 100000 |
| 4 | Light distribution angle | ° | 25°/60°90°/100° |
| 5 | Lead-in cable | mm | Φ8-φ10 |
| 6 | Overall dimensions | mm | Φ345×322(60W)/Φ345×342(80-100W) |
| Φ345×372(120-150W)/Φ345×422(160-300W) | |||
| 7 | Weight | Kg | 2.8/3.5/4/5 |
Aplications :
Industrial workshop ,warehouse ,shopping mall ,indoor stadium,etc .
Features:
Instructions:
◆ After determining the appropriate installation position of the lamp according to the site environment and lighting needs, prepare the corresponding three-core cable according to the length of the lamp to the 220V power connection;
◆ In the selected installation position, install and fix the lamp with a hanging chain, rope or hook with anti-drop function;
◆ After the lamp is fixed, the lamp must be fully grounded, and the cross-sectional area of the external grounding protection wire cannot be less than 4mm²;
◆ When the power is turned on, the power must be turned on according to the voltage specified on the nameplate.
Note that the brown wire of the external cable of the lamp is connected to the power live wire (ACL), the blue wire is connected to the power neutral wire (ACN), and the yellow-green wire is connected to the power ground wire (PE).
Precautions:
◆ Pack the lamps in the provided carton during transportation, and install foam shock absorption;
◆ After the lamp is installed, check whether the lamp is connected to the electricity correctly, and whether the lamp is fully grounded;
◆ Do not turn on the power before the lamp is fixed;
◆ There is a certain temperature rise on the surface of the lamp during use, which is a normal phenomenon.
◆ When cleaning the lamp, the power switch of the lamp must be cut off, and the lamp can only be cleaned after it has cooled down.
◆ This lamp adopts Y-type connection: If the external cable of this lamp is damaged, the line must be replaced by our company or service agent or a similarly qualified person to avoid danger.
Warning: It is strictly forbidden to open the cover when the power is on!
